Fire alarm bell compatible with GST control panel

Fire alarm bell

FS-B01 Fire Alarm Bell

Specification:

1.Base Material:

a>Iron Base

Size:φ100mm/150mm

b>Aluminium Base

Size:φ150mm/200mm

2.Operating Voltage:Dc24v/220v
3.Working Current:≤25ma
4.Audio Alarm:≥95db

installation note:

1.remove a gong

2.wire the bell in the circuit

3.mount bell mechanism on 4" square standard outlet box with the striker facing down

4.replace a gong

5.the bell must be mounted a minimum of 8ft.,above the floor,or.

6.as close to the ceiling as possible

7.polarized bell provide red(+) and black(-) lead wires

8.when you install the bell,must be observed the polarity